How Cool is That! (Coolant level sensor replacement)
September 1, 2024
Your vehicle’s engine runs hot. It should, since it’s a series of little explosions that create the power that gets you going where you want to go. To keep the engine cool, engineers have designed wonderful cooling systems that use liquid coolant, hoses, and a radiator to transfer the heat from the engine to the outside air.
In order for the system to work right, it has to have the right amount of that liquid coolant in it. So that you know when the coolant has dipped below the correct amount, there is a sensor that keeps an eye on it. When the coolant gets low, that sensor lights up a signal on the dash to alert you. It may literally say “Check Coolant” or it may have a picture that looks like an old-style bulb thermometer sitting in liquid. Your owner’s manual will usually tell you exactly what the one in your vehicle looks like.
If that sensor system isn’t working right, you could wind up driving for a long time with not enough coolant in the engine, and the excess heat can cause some extensive—and expensive—damage.
There are a couple of ways you will know if something’s wrong with your coolant level sensor. One is when you top off the coolant tank, and the low coolant light stays on. If you suspect yours might be having a problem, bring it in so we can thoroughly check your coolant system.
If it is a sensor, we can run a test to see where the problem is in your cooling system. It could be a bad sensor, but it also could be that there is something causing your coolant level to be low. If the sensor needs replacing, the technician will replace it, fill your coolant level to the manufacturer’s recommended level, and test for any leaks in the system. Really, how cool is that?
TLC Custom Exhaust Brakes & Tires
1735 N Main St
Royal Oak, Michigan 48067
248-541-8300
http://www.tlcautocareroyaloak.com
test
Need Service?
More articles from TLC Auto Care

Something to Latch On To (Hood Latch Safety)
October 25, 2026
The other day, a driver was trying to open his vehicle's hood so he could add some windshield washer fluid. But when he pulled the hood release inside the car, nothing happened. Usually, opening any hood is a 2-step process. You pull the hood release (which is usually a handle under the dashb... More

Ready, Set, COLD! (Getting Vehicle Ready for Winter)
October 23, 2026
When the temperatures plunge, your vehicle better be ready because it faces a whole new set of challenges. Rubber stiffens, glass fogs, fluids freeze. Just thinking about it can get your heart beating faster. So here are some tips for getting ready for those inevitable colder temperatures. Ma... More

Why Timing Belt Maintenance Can Save Your Engine
October 11, 2026
One part of your vehicle you probably never think of is the timing belt. It coordinates the rotation of the crankshaft (which converts the up and down motion of the pistons into rotation motion) and the camshaft (which opens and closes your engines valves). Its vital that the timing of these mov... More
