(Ball Joint Replacement)
December 14, 2025
Every day that goes by, our bodies get a little more wear and tear on them. Our vehicles have the same issue. The older we get and the farther we travel, certain parts start showing some wear.
Think of your hips. There are parts of our vehicles that are similar to them; just like hips allow your legs to pivot in several directions, your vehicle has similar parts called ball joints, and they connect your vehicle’s wheels to the suspension, allowing them to move together. These ball joints get a good workout every time the vehicle is moving, especially on bumpy roads.
Usually, these joints are well lubricated with grease, so they’ll work smoothly and quietly. They’re surrounded by a rubber sleeve called a boot, but that can wear out with age or exposure to moisture or debris. When the rubber breaks, the grease can leak out, and damage accelerates.
When the ball joints start wearing out, you may start to hear clunking sounds that come from the corners of your vehicle. You might hear it more clearly when you are turning a corner or going over a bump. Over time, it might get worse. Other signs are sloppy steering, vibrations when you’re moving and uneven tire wear.
If a ball joint gets extremely worn, it’s possible you can lose control of your vehicle, a dangerous situation indeed.
If you notice any of these symptoms, bring it to us so a technician can diagnose the problem. If they determine you need a new ball joint, the technician will check the condition of all the suspension components. We usually recommend if one of a pair of ball joints goes bad, the other is likely quite worn as well and should be replaced, too. In no time, you’ll be back on the road with an updated agile suspension that feels young again.
TLC Custom Exhaust Brakes & Tires
1735 N Main St
Royal Oak, Michigan 48067
248-541-8300
http://www.tlcautocareroyaloak.com
Need Service?
More articles from TLC Auto Care

Something to Latch On To (Hood Latch Safety)
October 25, 2026
The other day, a driver was trying to open his vehicle's hood so he could add some windshield washer fluid. But when he pulled the hood release inside the car, nothing happened. Usually, opening any hood is a 2-step process. You pull the hood release (which is usually a handle under the dashb... More

Ready, Set, COLD! (Getting Vehicle Ready for Winter)
October 23, 2026
When the temperatures plunge, your vehicle better be ready because it faces a whole new set of challenges. Rubber stiffens, glass fogs, fluids freeze. Just thinking about it can get your heart beating faster. So here are some tips for getting ready for those inevitable colder temperatures. Ma... More

Why Timing Belt Maintenance Can Save Your Engine
October 11, 2026
One part of your vehicle you probably never think of is the timing belt. It coordinates the rotation of the crankshaft (which converts the up and down motion of the pistons into rotation motion) and the camshaft (which opens and closes your engines valves). Its vital that the timing of these mov... More
